Redback premium DTF PET film - hot peel. 100 sheets of A3+ size in ziplocked aluminium moisture-controlled packaging. Frosted on one side.
This premium PET film has:
- plastic base film 75µm for both (single & double side) frosted.
some factories choose thinner base films, such as 60 micrometres, or even as low as 50 or 35 micrometres, to achieve cost savings
- (coating + base film) thickness 85µm for optimal ink absorption for the single side frosted and
- (coating + base film) thickness: 90µm for optimal ink absorption
for the double side frosted
Produces superior results when used with any decent to high quality DTF powder and decent to high quality DTF ink.
can be hot (instant) or cold peeled
Please note:
Use PET film in an adequately ventilated, dry environment, with humidity between 50-60%. It should be resealed when you are not using it.
The pack includes a note indicating which side is suitable for printing.
Heat press temperature 130-150 °C, 15-20 sec the pressing temperature may vary depending on the type of equipment or brand utilized.
Epson & Brother DTG printers film for DTF printing A3+ single or double side
This premium PET film has been formulated for optimal absorption of DTF ink or original ink for DTG Epson and Brother printers. It will peel without problems, leaning stunningly vivid and durable DTF transfers.
Please ensure that your unused film is stored in its airtight (ziplocked) bag away from humidity as moisture can affect any good PET film's ink absorption and powder adherance. Do not store it in very cold (below 5 degrees) or hot environments (above 30 degrees) and store away from direct sunlight.