1kg of Redback premium anti - sublimation TPU DTF adhesive powder - white
Material: Thermoplastic Polyurethane (TPU)).
Granulometry (particle size): 120 -250 µm (microns).
This premium DTF powder is formulated to provide excellent adhesion and significantly reduce dye migration during the heat transfer process. It acts as a barrier, minimizing the risk of fabric dyes bleeding into your printed designs, thereby helping to maintain vibrant and sharp images.
Shake this onto your printed transfer, heat it up until it melts, then use a heat press to adhere the transfer to your T-shirt or other material. Works for any material and for both light and dark garments.
The curing time
- Small oven: Typically ranges between 100 to 110 degrees Celsius for around
8 -15 sec in small oven.
- In a complete setup (printer and shaker), the curing duration is aligned with the machine's operating speed. Recommended temperature range is 120-150°C.
Please note that results can vary depending on the equipment type or brand
WARNING: Always work in a well-ventilated area and wear protective gear (masks, gloves) when handling DTF, DTG, UV, or other specialty printing materials. Fumes can be hazardous, so we highly recommend using a fume extractor and ensuring proper ventilation.
anti - sublimation TPU DTF adhesive powder - white 1kg
This premium anti- sublimation TPU white powder has been formulated for optimal adhesion using quality PET film and ink. It is medium-fine powder, ideal for detailed prints. It provides rapid adhesion and a consistent finish to all areas of the film, including the very fine edges.
The best all-round quality powder is not too fine, nor too coarse.
Fine powder particles are very sensitive to moisture, tending to bind and causing slight irregularities in the finish, causing the print to be slightly thicker in some areas than its otherwise optimal silky finish.
Powder that is too coarse will be more difficult to get an even melted coating with and is especially tricky to get right for small details on the edges of your prints (like small text).
Please store the powder away from direct sunlight and extreme temperatures (below 5 degrees Celsius and above 30 degrees Celsius)