This chip resetter is compatible to reset cartridge chip and maintenance tank chip for EPSON 3800/3800C/3850/3880/3890/3885,
cartridge number T5811-T5819/T5808-T5809/T5891-T5899
Reset the chip before the ink level fall to 15%
How to use:
1. align the chip to the groove of chip resetter and enable the probe of chip resetter contacts the contactor of the chips.
3. keep the two units in firm contact. If the red LED-light gleams, it means the connection is good.
4. few seconds later, the red light turns to green, and it indicates the chip data has been revived.
chips can usually be reset several times before they are no longer functional. Generally, a resetter can reset a chip from 5 – 10 times before the chip needs replacement.
Reset the chip before the ink level fall to 15%
Note: This chip resetter made to use with original Epson cartridges
If the red LED doesn’t turn green:
Check the pins dirt, ink, or oil may prevent good contact.
The chip may be damaged or updated by Epson; in this case, replace the cartridge.
Some customers use this resetter with compatible cartridges. If it doesn’t work, it may be due to:
Poor ink quality
Air trapped in the cartridge (remove with a syringe and retry)
A “one-time chip” that cannot be reset
cartridge chip & maintenance tank chip resetter Epson Stylus Pro 3800
the cartredige and maintenance chip resetter is made of light durable plastic with an easy design to use, it is provided by a battery, this battery is un replacable. you need to buy a new resetter when the battery near it's expiery life.
