The kit contains three diffrent cleaning solutions that help maintain your printhead and keep it working properly.
1. Concentrated Cleaning Liquid DTF
- Usage: Can be used as is or diluted with distilled water. Avoid tap water, as minerals can corrode the printhead.
2. Powerful Cleaning Liquid DTF/DTG
- Usage: Use for manual cleaning (flushing nozzles). Do not dilute.
3. Moisturiser DTF/DTG
Keeps the printhead and capping station from drying out.
- Usage: After each printing day, add 1 small drops of the cleaning liquid to the capping station.
Before starting the next print job, run a couple of standard cleaning cycles to flush out any remaining cleaning solution. - To clean the capping staion, add a few drops to the capping station and dab it with a lint-free cloth to remove excessive ink residue, then run a cleaning cycle afterwards.
Using these solutions as recommended will help extend the lifespan of your printhead and maintain consistent print quality.
Epson DTF printer cleaning & maintenance kit- value pack
This premium DTF Epson Piezo Nano printhead cleaning liquid and moisturiser are essential for daily cleaning and maintenance, helping to prevent clogs and extend the life of your printhead.
You can clean the print head manually or via the cleaning function in your printer or on your PC.
It is a good idea to check whether the nozzle needs to be cleaned. If it is operating well, you don't need to clean it. Cleaning it usually costs you around 10% - 20% of your ink for each colour nozzle.
Signs that your printer head is clogged include:
- your print is blurry, or
- the colours are faded or degraded (which is usually striping across the print), or
- you get blank pages despite having sufficient ink in the cartridges.
It is a good idea to clean your printer head once a month manual - the most you use it, the greater the likelihood you will need to clean it.