We apologise that the white cartrediges A1,A2 are currently out of stock. It is expected to be back in stock on 25 February 2026. We apologise for any inconvenience caused.
This pack contains:
- 2* compatible refillable cartridges C13T725A0N have the chip attached to them respectively A1 and A2
- 2* litre bottle of DTF white ink
- 1* plastic funnel for refil
How to install the refillable cartridges:
Please follow these steps when you install the cartridges for the first time:
- Fill the cartridges with ink, we would recommend filling them to its full capacity 600ml.
- Open the coloured plug, the small hole for air circulation before installing the cartridges. see figure1.
- Open the cartridge bay door, remove Epson original cartridges, then install the compatible refillable cartridges into their respective positions inside the print head compartment, verify that the cartridge is seated in the printer securely.
- Push it down firmly until you hear a click, then close the cartridge bay door.
Please contact us if you found any difficulty to make them work.
- "one-time chip," it means that the chip can only be used for a single reset or refill operation. After this operation when the ink starts to run out, the chip becomes inactive or unusable, it is necessary to replace the chip, and then refill the cartridges for futher use.
- Updating your Epson printer firmware version may prompt a cartridge problem message on your printer’s display, preventing you from using compatible cartridges. Customers that want to continue using compatible cartridges may choose to avoid updating their firmware
Sutible for Epson SureColor SC-F2000 SC-F2100 SC-F2130 SC-F2160
DTF ink 2 L + 2 white refillable cartridges for Epson F2000/2100/2160
These new ink cartridges are made of a transparent polypropylene material PP which is considered as an environmentally conscious option, with its high transparency property make them convenient for observing the ink levels. These cartridges are reinforced with leak-proof design for a long-time use.
The (on-time chip) means when the ink level indicate low and the cartridge stop to work, you need to take it out form the printer, replace the chip with a new one, re-fill the cartridge, put it back into the printer and resume your printing.
The chip will display the ink level.
Please use the funnels that included in this pack to refill the cartridges for your own convenience.
