top of page

Redback premium DTF PET film - hot peel. 100 sheets of A3 size in ziplocked aluminium moisture-controlled packaging. Frosted on one side.

This premium PET film has:

  • plastic base film 75µm (some factories choose thinner base films, such as 60 micrometres, or even as low as 50 or 35 micrometres, to achieve cost savings)
  • (coating + base film) thickness 85µm for optimal ink absorption.

Produces superior results when used with any decent to high quality DTF powder and decent to high quality DTF ink.

can be hot (instant) or cold peeled

Please note:

Use PET film in an adequately ventilated, dry environment, with humidity between 50-60%. It should be resealed when you are not using it.

The pack includes a note indicating which side is suitable for printing.

Heat press temperature 130-150 °C, 15-20 sec the pressing temperature may vary depending on the type of equipment or brand utilized.

 

A3 PET film for Epson & Brother DTG printers, single side frosted

$109.00Price
  • This premium PET film has been formulated for optimal absorption of DTF ink or original ink for DTG Epson and Brother printers. It will peel without problems, leaning stunningly vivid and durable DTF transfers.

    Please ensure that your unused  film is stored in its airtight (ziplocked) bag away from humidity as moisture can affect any good PET film's ink absorption and powder adherance. Do not store it in very cold (below 5 degrees) or hot environments (above 30 degrees) and store away from direct sunlight.

bottom of page