Leadshine Servo Motor 90W
Main power voltage: 24-36VDC or large format inkjet printers delivering precise and reliable performance. Durable construction
Power: 90W. Rated torque: 0.3N.m.
Pulse + Direction
Net wight; 0.942 kgServo Motor Terminal Descriptions:
- +Vdc / GND: DC power input (24–36 V).
- NC: Not connected
- RX / TX / GND / 5V: Communication and setup connection.
- ALM+ / ALM−: Alarm output signal.
- PUL+ / PUL−: Pulse input for motion commands.
- DIR+ / DIR−: Direction control input.
IMPORTANT: Turn off the power before changing DIP switch settings or modifying any wiring to prevent damage to the internal electronics.
Leadshine Servo Motor 90W
Environment requirements:
Ensure adequate ventilation in enclosed or high-temperature installations. Avoid mounting the motor near heat sources or in areas subject to vibration, as this may affect performance.
No explosive, flammable, or corrosive gases
Avoid direct sunlight
Clean, dust-free area
Temperature: −20°C to +50°C (non-freezing)
Humidity: <85% RH (non-condensing)
