Operate the motor only within its specified limits. Use outside these conditions may cause damage.
For indoor machine assembly only.
Operating voltage range: 24 ~ 36V
Rated current: 1.8 ~2 A
Static torque: 1.0 N·m
This motors can be used on 1.8m or 3.2m large format printers
Operating conditions:
• Temperature: −20°C to +50°C (non-freezing)
• Humidity: <85% RH (non-condensing)
Environment requirements:
• No explosive, flammable, or corrosive gases
• No direct sunlight
• Clean, dust-free area
• Minimal airflow exposure
• Good heat dissipation
• No continuous vibration or strong impact
The circuit board in this motor is assembled using an automatic soldering machine, ensuring uniform, durable, and visually appealing solder joints compared to traditional methods. The coil is constructed with 100% pure copper enamel wire and precision-wound using advanced technology. The wires are arranged evenly, preventing overheating, torque degradation, and excessive noise during prolonged operation.
stepper motor Busheng for large format DTF printer, model:2
Please note:
In enclosed installations, such as control panels or areas near heat sources, the ambient temperature may increase. Ensure adequate ventilation is provided during motor installation, and consider the effect of elevated ambient temperatures.Do not install the motor near sources of vibration or in locations where vibration may adversely affect operation.
