Operate the motor only within its specified limits. Use outside these conditions may cause damage.
For indoor machine assembly only.
Operating voltage range: 24 -38 V
Rated current: 2.8 A
Static torque: 1.0 N·m
This motors can be used on 1.8m or 3.2m large format printers
Operating conditions:
• Temperature: −20°C to +50°C (non-freezing)
• Humidity: <85% RH (non-condensing)
Environment requirements:
• No explosive, flammable, or corrosive gases
• No direct sunlight
• Clean, dust-free area
• Minimal airflow exposure
• Good heat dissipation
• No continuous vibration or strong impact
Performance:
• Smooth, low-noise operation
• Continuous operation up to 10,000 hours
• Rated for temperatures above 60°C for 10,000 hours
stepper motor DRCOT for large format DTF printers, model :1
Please note:
In enclosed installations, such as control panels or areas near heat sources, the ambient temperature may increase. Ensure adequate ventilation is provided during motor installation, and consider the effect of elevated ambient temperatures.Do not install the motor near sources of vibration or in locations where vibration may adversely affect operation.
