Sample pack of Redback premium DTF PET film. 20 sheets of A4, A3 and A3+ size in the pack. This premium PET film is frosted on one or both sides.
- plastic base film 75µm (some factories choose thinner base films, such as 60 micrometres, or even as low as 50 or 35 micrometres, to achieve cost savings)
- (base +coating) thickness: 80 - 85µm for optimal ink absorption for single side frosted
- (base +coating) thickness: 85 - 90µm for optimal ink absorption for double side frosted
Please note:
- Use PET film in an adequately ventilated, dry environment, with humidity between 50-60%. It should be resealed when you are not using it.
- The pack includes a note indicating which side is suitable for printing
- Heat press temperature 150-160 °C, 8 sec the settings may vary depending on the type of equipment or brand utilized.
A4, A3 or A3+ DTF PET film single or double side frosted hot/cold peel-20 sheets
This premium PET film has been formulated for optimal absorption of DTF ink and will peel without problems, leaning stunningly vivid and durable DTF transfers.
Please ensure that your unused film is stored in its airtight (ziplocked) bag away from humidity as moisture can affect any good PET film's ink absorption and powder adherance. Do not store it in very cold (below 5 degrees) or hot environments (above 30 degrees) and store away from direct sunlight.
